Victron Lynx Smart BMS 1000 (M10)

$2,121.95

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A (with M8 busbar connections) and 1000A (with M10 busbar connections).

GTIN: 8719076057604 SKU: VE-SW-LS-BMS 1000-M10 Categories: , ,

Description

The Lynx Smart BMS is a dedicated Battery Management System (BMS) for the Victron Lithium Battery Smart batteries.
These batteries are Lithium Iron Phosphate (LiFePO4) batteries and are available in 12.8 V or 25.6 V in various capacities.
They can be connected in series, parallel and series/parallel so that a battery bank can be built for system voltages of
12V, 24V or 48V. The maximum number of batteries in one system is 20, which results in a maximum energy storage of
84 kWh in a 12V and up to 102 kWh in a 24V and 48V system.
For more information on these batteries, visit the Victron Lithium Battery Smart product page.

Out of the various available BMSes, the Lynx Smart BMS is the most feature rich and complete option and integrates
seamlessly into the Lynx Distributor system. It is available in 500 A (M8) and 1000 A (M10) versions.
Built-in 500 A or 1000 A contactor

The contactor acts as a secondary safety system to protect the battery in case the primary controls (ATC, ATD and/or
DVCC) fail to disable loads and/or chargers when required and is also suitable as a remote controllable main system
switch.

Pre-charge circuit

In addition to the contactor, a built-in pre-charge circuit prevents high inrush currents when connecting a capacitive
load such as a MultiPlus/Quattro or other inverter, eliminating the need for external pre-charging.

Monitoring and control

Monitor and control the BMS via Bluetooth using the VictronConnect App or a GX device such as a Cerbo GX and the
VRM Portal. A built-in battery monitor that operates in a similar fashion as the other Victron Energy battery monitors,
provides data such as state of charge, voltage, current, historical data, status info and more in real time, and with Instant
Readout even without the need to connect to the BMS, allowing diagnostic at a glance.

DVCC closed loop control as well as ATC/ATD contacts

Compatible Victron inverter/chargers and solar chargers are automatically controlled via a connected GX device and
DVCC. The ATC/ATD contacts can be used to control other chargers and loads that have a remote on/off port.

Programmable relay

The relay can be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external
regulator (ignition cable). In Alternator ATC mode, the relay will only activate when the contactor is closed. Alternator
ATC contact of the alternator opens first and then with a delay of 2 seconds the contactor. These 2 seconds ensure that
the alternator is switched off before the battery is disconnected from the system.

AUX terminal

The advantage of the onboard auxiliary power supply (1.1 A @ system voltage) is to provide power to specific loads (i.e.
a GX device) after the BMS has shut down the loads in the event of a low cell voltage event. If no charge voltage is
detected within 5 minutes, the BMS including the AUX connection switches off.

VE.Can and NMEA 2000 data communication

VE.Can allows for easy connection (standard RJ45 network cable) and communication with a GX device. Since the
CANbus protocol is based on NMEA 2000 (and J1939), it is easy to integrate into a marine network and feed your marine
MFD with data (requires a VE.Can to NMEA 2000 micro-C male cable).

Lynx Distributor fuse monitoring

Read out fuse status and receive an alarm in case a fuse is blown. The Lynx Smart BMS monitors up to 4 connected Lynx
Distributors and their fuses via VictronConnect or a GX device

Additional information

Weight 3 kg
Dimensions 11 × 30 × 19 cm
Brand

Victron Energy

Connector

M10, RJ45

Shipping

HOW MUCH IS SHIPPING?

Shipping is calculated at checkout based on the contents of your cart and the shipping address. This takes into account product weight and dimensions, and whether the location being sent to is metro, regional or remote. The price will change depending on whether it is a commercial or residential address. There is an extra charge for items marked as *Dangerous Goods by the courier.

Please note, that we are currently using Freight Exchange as a freight broker. Their terms & conditions are listed here.

WHERE DO YOU SHIP?

We ship to most destinations in Australia. If the checkout does not allow your shipping address, please contact us and we will see what we can do to help.

WHO DO YOU SHIP WITH?

We use different couriers depending on rates and services available, including Border Express, Couriers Please and Australia Post. If you have a specific reason to use or not use a particular courier please let us know.

what about insurance?

We will generally insure any delivery above $500, BUT;

Freight damages MUST be reported to us within 24 hours of delivery for insurance claims on damages to be realised. Where possible please inspect the delivery for external damage to the packaging, and if damage is suspected inspect the goods BEFORE signing for the delivery.

Please refuse any obviously damaged deliveries (smashed panels, dented batteries) and ask the delivery driver to return the delivery to the depot and report the damages to us ASAP.

If you have granted “Authority to leave” or missed the driver, or have your delivery made to a depot, have the receiver inspect the delivery and please report any freight damage to us directly with photos via email within 24 hours of the delivery being made.

Unfortunately, we cannot guarantee damages will be covered by insurance if they are reported after 24 hours from the time of delivery.

How Long Does the shipping take?

It varies greatly based on the destination and the products ordered. Orders are usually dispatched from our warehouse in Preston, VIC within 48 hours. You can use the estimates below as a rough guide for shipping time:

  • VIC and SA: 1-2 days
  • QLD and NSW: 2-3 days
  • NT, WA and TAS: 3-10 days +

These estimates do not apply if the destination is regional or remote. Once orders leave our warehouse we have very little control over the actual shipping time. If you need a more accurate estimate of shipping time please contact us.

RETURNS

ARE YOU ELIGIBLE?

Thanks for shopping at Preston Off Grid. If you are not entirely satisfied with your purchase, we’re here to help.

You have 30 calendar days to return an item from the date you received it.

To be eligible for a return:

  • Your item must be unused and in the same condition that you received it.
  • Your item must be in the original packaging.
  • Your item needs to have a receipt or proof of purchase.
  • Change of Mind returns may incur a restocking fee.

REFUNDS

Once we receive your item:

  1. We will inspect it and notify you that we have received your returned item.
  2. We will immediately notify you on the status of your refund after inspecting the item.
  3. If your return is approved, we will initiate a refund to your credit card (or original method of payment).
  4. You will receive the credit within a certain amount of days, depending on your card issuer’s policies.

SHIPPING

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non­refundable.

If you receive a refund, the cost of return shipping will be deducted from your refund.

WARRANTY CLAIMS

ALL requests for warranty or service MUST be lodged via our Technical Support email. We will NOT accept any goods without an RMA being allocated to you first.

Goods that are covered by a Manufacturer’s Warranty will be eligible for a replacement or repair, at the discretion of the manufacturer.

DOA (Dead on Arrival) warranty claims must be lodged within 7 days of receiving goods. It is the customer’s responsibility to inspect all goods within this time period.

We do not provide replacements to cover you while your item is tested or repaired under warranty. It is the customer’s responsibility to ensure they have sufficient backup equipment to cover them in the event of equipment failure. We highly recommend people who are living off-grid, or using our equipment for mission-critical applications, invest in backup Inverters and Solar Charge Controllers.

FREIGHT DAMAGE

Freight damage claims must be lodged within 7 days of receiving goods. It is the customer’s responsibility to inspect all goods within this time period. We will not accept any claims outside of this time period.